Product Description
Connector, pins and seal for most 3-wire Bosch TPS sensors. This connector is used in many 3-wire Bosch applications, including TPS, 3-wire IAC motors and crank sensors, to name a few.
At this point in time, Electromotive is not selling or repairing product. If you have a serious interest in purchasing the rights and technology of the Electromotive product line as well as its sale channels, including all of our website names, please contact tech@electromotive-inc.com. Thank you for your understanding and support.
Bosch TPS Connector
$29.00
Related Products
-
TECI, TECII and HPV3-B Serial Cable
9-pin serial cable for connecting early “gold”-era Electromotive units to a 9-pin serial port-equipped laptop or serial adapter.
-
Cable and Connector for 1 Bar MAP Sensor
6′ 3-wire cable and terminated connector for use with GM-style 1 bar MAP sensor. This cable and connector can be used to repair a damaged harness or to extend the length of an unterminated harness. It can also be used when terminating the connector pins directly to the harness is not desired or possible.
-
Coolant Connector, Pins and Seal
Black 2-pin Metri-Pack connector, pins and seal for GM coolant temp sensor. This connector is also used in some other GM 2-wire connector applications, including 2-wire GM crank position sensors such as those found in some Ecotec 4-cylinder engines.
-
Electromotive DFU Connector
4-position in-line Metri-Pack connector used on all Electromotive 4- and 6-cylinder DFUs. Connector comes with the appropriate pins and seals to accommodate the larger 16 AWG wire of the DFU wires.