Product Description
Bosch-style 4-wire HEGO sensor for use with all Electromotive systems, including early TEC1 and TEC2 systems. This is a narrow-band sensor.
At this point in time, Electromotive is not selling or repairing product. If you have a serious interest in purchasing the rights and technology of the Electromotive product line as well as its sale channels, including all of our website names, please contact tech@electromotive-inc.com. Thank you for your understanding and support.
4-Wire HEGO Sensor
$119.00
- 4-wire HEGO sensor with 4-position GM connector
- Mating connector, pins and seals for harness termination
Related Products
-
1 Bar MAP Sensor
GM-style 1 bar MAP sensor. This sensor is used to determine engine load on naturally aspirated engines. Can also be used as an external barometric correction sensor. Sensor features vacuum port, mounting tabs and necessary connector, pins and seals for terminating harness.
-
3 Bar MAP Sensor
GM-style 3 bar MAP sensor. This sensor is used to determine engine load on forced induction engines. This sensor is intended to be used on engines producing positive manifold pressure up to 2 bar, or roughly 30psi of boost. This sensor is not recommended for use with engines that will not see boost above 1 […]
-
Manifold Air Temp Sensor
GM manifold air temp sensor with connector. Compatible with all current and past Electromotive systems that have an MAT input.
-
D Shaft TPS Sensor W/ Connector
TPS Sensor with the D-Shaft input common on many European and early Japanese throttle bodies. May require mount fabrication, but shaft size should be perfect fit. Great for replacing non-potentiometer style throttle switches. This is the same sensor used in our 90-93 manual trans Miata TPS adapter.