Product Description
This strain relief mounts to the 35 pin AMP connectors used on Electromotive TECgt and TEC EVO systems. It provides protection for the wires at the point of entry into the connector.
$29.00
This strain relief mounts to the 35 pin AMP connectors used on Electromotive TECgt and TEC EVO systems. It provides protection for the wires at the point of entry into the connector.
Fuse and relay harness used for all TEC systems. This fuse and relay harness includes a fuses and relays for the TEC ECU, coils, injectors and fuel pump pre-wired and ready to integrate with our flying lead harnesses.
Harness side power/ground connector for all Electromotive systems since the TEC3. Used for ground only on XDi/XDi2 and TEC3r systems, and power/ground on TECgt, TECs, TEC EVO and early purple TEC3 systems.
The TECs AMP connector kit consists of the 23-pin AMP connector used on the harness side of the TECs units. These connectors can be purchased as replacements for worn or damaged connectors, or when building harnesses from scratch. Includes 25 AMP seal terminals.
The 200-series Molex connector kit consists of the 73-pin Molex connector used on the harness side of the 200-series units (TECs200, TECgt200 and XDI200).