$60.00
The 200-series Molex connector kit consists of the 73-pin Molex connector used on the harness side of the 200-series units (TECs200, TECgt200 and XDI200).
The 200-series Molex connector kit consists of the 73-pin Molex connector used on the harness side of the 200-series units (TECs200, TECgt200 and XDI200). These connectors can be purchased as replacements for worn or damaged connectors, or when building harnesses from scratch. Includes 50 standard molex terminals and one ground terminal and seal.
The XDi/XDi2 AMP connector kit consists of the 23-pin AMP connector used on the harness side of the XDi and XDi2 units. These connectors can be purchased as replacements for worn or damaged connectors, or when building harnesses from scratch. Includes 25 AMP seal terminals.
The 5-pin TECII connector is used on top of 8-cylinder TECII units and is used for the injector connections.
The 14-pin TECII connector is used on either end of the TECII unit to allow for wiring connection.
This strain relief mounts to the 35 pin AMP connectors used on Electromotive TECgt and TEC EVO systems. It provides protection for the wires at the point of entry into the connector.