Product Description
Harness side power/ground connector for all Electromotive systems since the TEC3. Used for ground only on XDi/XDi2 and TEC3r systems, and power/ground on TECgt, TECs, TEC EVO and early purple TEC3 systems.
At this point in time, Electromotive is not selling or repairing product. If you have a serious interest in purchasing the rights and technology of the Electromotive product line as well as its sale channels, including all of our website names, please contact tech@electromotive-inc.com. Thank you for your understanding and support.
TEC and XDi 2-Pin Power/Ground Connector
$15.00
- 2-pin female power/ground connector
- 4 terminals
- Seal
- Terminal retainer clip
Related Products
-
TEC3r and 6/12 AMP Connector Kit
TEC3r and 6/12 AMP connector kit consists of the 2 23-pin AMP connectors used on the harness side of the TEC3r and 6/12 units. These connectors can be purchased as replacements for worn or damaged connectors, or when building harnesses from scratch. Includes 50 AMP seal terminals.
-
14-Pin TECII Connector
The 14-pin TECII connector is used on either end of the TECII unit to allow for wiring connection.
-
35 Pin AMP Connector Strain Relief
This strain relief mounts to the 35 pin AMP connectors used on Electromotive TECgt and TEC EVO systems. It provides protection for the wires at the point of entry into the connector.
-
200-Series Molex Connector Kit
The 200-series Molex connector kit consists of the 73-pin Molex connector used on the harness side of the 200-series units (TECs200, TECgt200 and XDI200).