GM-style 1 bar MAP sensor. This sensor is used to determine engine load on naturally aspirated engines. Can also be used as an external barometric correction sensor. Sensor features vacuum port, mounting tabs and necessary connector, pins and seals for terminating harness.
GM-style 3 bar MAP sensor. This sensor is used to determine engine load on forced induction engines. This sensor is intended to be used on engines producing positive manifold pressure up to 2 bar, or roughly 30psi of boost. This sensor is not recommended for use with engines that will not see boost above 1 […]
GM manifold air temp sensor with connector. Compatible with all current and past Electromotive systems that have an MAT input.
GM shaft-style TPS sensor such as those on many ’90s and ’00s-era GM engines. This sensor turns clockwise when looking at the sensor. This means that the throttle shaft turns counterclockwise when looking at it head-on. Sensor comes with mating Metri-Pack connector, pins and seals for harness termination. Sensor features a return spring.
4-wire GM O-ring-style IAC motor with in-line Metri-Pack connector. This IAC motor can be used as a replacement for those found in most aftermarket throttle bodies, including those made by Electromotive. Also fits Electromotive remote-mount and Ford adapters.