Product Description
9-pin serial cable for connecting early “gold”-era Electromotive units to a 9-pin serial port-equipped laptop or serial adapter.
At this point in time, Electromotive is not selling or repairing product. If you have a serious interest in purchasing the rights and technology of the Electromotive product line as well as its sale channels, including all of our website names, please contact tech@electromotive-inc.com. Thank you for your understanding and support.
TECI, TECII and HPV3-B Serial Cable
$49.00
6′ cable with DB9 serial port on one end and RX, TX and ground leads at the other end
Related Products
-
Cable and Connector for 2 and 3 Bar MAP Sensor
6′ 3-wire cable and terminated connector for use with early GM 2 and 3 bar MAP sensors. This cable and connector can be used to repair a damaged harness or to extend the length of an unterminated harness. It can also be used when terminating the connector pins directly to the harness is not desired […]
-
Bosch TPS Connector
Connector, pins and seal for most 3-wire Bosch TPS sensors. This connector is used in many 3-wire Bosch applications, including TPS, 3-wire IAC motors and crank sensors, to name a few.
-
Connector for GM O-Ring-Style IAC
In-line Metri-Pack connector for GM O-ring-style IAC motor. Includes pins and seal.
-
Electromotive DFU Connector
4-position in-line Metri-Pack connector used on all Electromotive 4- and 6-cylinder DFUs. Connector comes with the appropriate pins and seals to accommodate the larger 16 AWG wire of the DFU wires.